Airmar B75C-0-H 0d Tilt With Navico 9-Pin MM Cab

Airmar B75C 0° tilted element High CHIRP Bronze Thru Hull comes with a 9-Pin Navico Mix-N-Match Cable. Model: B75C-0-H-9N. It serves as a depth and fast-response water-temperature sensor. With one transducer, you get 80 kHz of total bandwidth, covering the popular 200 kHz fishing frequency and more. It features the exclusive Xducer ID® technology. These new broadband transducers are a must - have for your fishing trips. Whether you're a commercial fisherman, charter captain, or tournament angler, they offer amazing bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail. You can easily tell apart baitfish, game fish, and underwater structures. One installation saves you time and money. It's highly sensitive to small targets and shows detailed, high - resolution images on the echosounder screen. Specifications: CHIRP Frequency is 130 kHz to 210 kHz, Beamwidth is 15° to 9°, Element tilt is 0°, Deadrise is 0° to 7°, and Maximum depth is 700ft. What's in the box: B75C-0-H-MM and MMC-9N.

Using this Airmar transducer is easy. First, install it following the included instructions. Connect the Navico 9 - Pin Mix - N - Match Cable to your compatible device. Once installed, turn on your echosounder and start getting depth and water - temperature readings. When fishing, the transducer will give you detailed information about what's under the water. For best results, make sure the transducer is properly aligned according to your boat's deadrise. As for maintenance, regularly check the cable for any signs of damage. Keep the transducer clean from dirt and debris. If you notice any issues with the readings or the device itself, consult the manufacturer's support. Avoid hitting the transducer against hard objects as it may affect its performance.