Airmar B175C-12-M 12d Tilt With Humminbird 9-Pin MM Cable

The Airmar B175C-12-M-HB is a remarkable transducer. It's a depth and fast - response water - temperature sensor. This medium - frequency transducer offers CHIRP technology from 85 kHz to 135 kHz, with a 24° to 16° beamwidth. With one transducer, you get 50 kHz of total bandwidth, covering popular fishing frequencies like 88 and 107 kHz. Ideal for fiberglass or wood hull boats 8 m (25’) and above. It's suitable for commercial fishermen, charter captains, and tournament anglers. Chirp transducers can detect the bottom down to 3,000m (10,000’) with 5 to 10 times more detail, allowing you to distinguish between baitfish, game fish, and underwater structures. It saves you time and money with a single - installation 50 kHz bandwidth. Specifications include a deadrise of 8° to 15°, a urethane acoustic window, a 1 kW power rating at 1% duty cycle, and a frequency range of 85 - 135 kHz. The box contains B175C - 12 - M - MM and MMC - HB.

Using the Airmar B175C-12-M transducer is easy. First, make sure your boat has a fiberglass or wood hull and is at least 8 m (25’) long. Then, install the transducer as per the instructions, and connect it with the Humminbird 9 - pin cable provided in the box. When fishing, turn on your device and the transducer will start providing depth and water - temperature information. It can show you details of the underwater world, like different types of fish and structures. As for maintenance, keep the transducer clean. After each use, rinse it with fresh water to remove any salt or debris. Store it in a dry place. Remember, the deadrise of your boat should be between 8° to 15° for the best performance. Also, be careful with the power rating of 1 kW at 1% duty cycle to avoid overheating or damaging the transducer.