Airmar B175C-12-M 12d Tilt With Garmin 12-Pin MM Cable

The Airmar B175 Chirp Medium Frequency transducer with a 12d tilted element comes with a Garmin 12-Pin Mix-N-Match Cable. Model: B175C-12-M-12G. It's a depth and fast - response water - temperature sensor. Operating from 85 kHz to 135 kHz, it has a 24° to 16° beamwidth and provides 50 kHz of total bandwidth from one transducer. It covers popular fishing frequencies like 88 and 107 kHz. Ideal for fiberglass or wood hulls on boats 8 m (25’) and above. Airmar's new broadband transducers are a game - changer for fishing. Whether you're a commercial fisherman, charter captain, or tournament angler, these Chirp transducers can detect the bottom down to 3,000m (10,000’) with 5 to 10 times greater detail. You can easily tell apart baitfish, game fish, and underwater structures. One installation gives you up to 50 kHz of bandwidth, saving you time and money. Specifications: Deadrise 8° to 15°, Acoustic Window Urethane, Power rating 1 kW @ 1% duty cycle, Frequency 85 - 135 kHz. What's in the box: B175C - 12 - MM and MMC - 12G.

Using the Airmar B175C - 12 - M transducer is straightforward. First, make sure your boat is of the appropriate size (8 m or above) and has a fiberglass or wood hull. Install the transducer according to the instructions that come with it. Connect the Garmin 12 - Pin Mix - N - Match Cable properly. Once installed, turn on your fishing equipment. This transducer will start providing depth and water - temperature information. You can use it to find fish and underwater structures easily. When using, avoid hitting the transducer against hard objects as it may damage the element. After each use, rinse the transducer with fresh water to remove any salt or debris. Keep it in a dry place when not in use. If you notice any issues with the performance, check the connections first and then refer to the troubleshooting section in the manual.