Airmar B175C-0-HW 0d Tilt With Raymarine 11-Pin MM Cable

The Airmar B175 is a wide-beam CHIRP high-frequency 0° tilted element transducer, paired with a Raymarine 11-pin mix-n-match cable. Model: B175C-0-HW-11R. It serves as a depth and fast-response water-temperature sensor. With high CHIRP frequencies from 150 kHz to 250 kHz, a 25° constant beamwidth, and 100 kHz of total bandwidth from one transducer, it covers the popular 200 kHz fishing frequency and more. Ideal for fiberglass or wood hulls on boats 8 m (25’) and above. Airmar's new wide beam Chirp product line offers better boat coverage. These transducers are broadband wonders, improving Chirp-ready echosounder performance. Anglers get twice the coverage compared to current high-frequency Chirp transducers. The constant 25° beam width across the frequency band provides vast bottom coverage, precise fish detection in the upper water column, and crisper, larger return images on the display. Additional cables are required: A80328 for single use and A10246 for pair use. Specifications include a 0° to 7° deadrise, urethane acoustic window, 1 kW @ 1% duty cycle power rating, and 150 to 250 kHz-A (Broadband) frequency. The box includes a B175C-0-HW-MM transducer and an MMC-11R-HM mix and match cable.

Using this Airmar transducer is quite straightforward. First, make sure your boat is suitable, with a fiberglass or wood hull and at least 8 meters long. Install the transducer according to the instructions provided. Connect it to your system using the included Raymarine 11-pin mix-n-match cable. If you're using it as a single unit, you'll need to get the A80328 cable; for paired use, grab the A10246 cable. When you're out on the water, the transducer will start working right away to give you depth and water temperature readings. It's great for fishing as it can detect fish in the upper water column that other transducers might miss. As for maintenance, keep the acoustic window clean. You can use a soft cloth to wipe it down. Also, check the cables regularly for any signs of wear and tear. Make sure the connections are tight to avoid any signal loss. And that's it! Enjoy your boating and fishing with this great Airmar transducer.