Airmar B75C-0-H 0d Tilt With bare Wire MM Cable

Airmar B75C 0° tilted element High CHIRP Bronze Thru Hull transducer comes with a 7-Pin Navico Mix-N-Match Cable. Model: B75C-0-H-BL. It serves as a depth and fast-response water-temperature sensor. With 80 kHz of total bandwidth from a single transducer, it covers the popular 200 kHz fishing frequency and other bandwidths. It features the exclusive Xducer ID® technology. Ideal for commercial fishermen, charter captains, and tournament anglers, this CHIRP transducer can detect the bottom down to 3,000m (10,000') with 5 to 10 times greater detail. It's highly sensitive to small targets and sends back detailed information, showing as clear, high-resolution images on the echosounder screen. Specifications: CHIRP Frequency is 130 kHz to 210 kHz, Beamwidth is 15° to 9°, Element tilt is 0°, Deadrise is 0° to 7°, and Maximum depth is 700ft. What's in the box: B75C-0-H-MM and MMC-BL.

Using this Airmar transducer is quite straightforward. First, install it according to the instructions that come with it. Once installed, connect it to your echosounder. It will start working right away, giving you accurate depth and water temperature readings. When you're out fishing, it can help you detect the bottom and different types of fish clearly. Just turn on your echosounder and let the transducer do its job. As for maintenance, keep it clean after each use. Rinse it with fresh water to remove any salt or debris. Avoid hitting it against hard objects as it can damage the transducer. Also, check the cable regularly for any signs of wear or damage. If you notice any issues, replace the cable promptly. By following these simple steps, your transducer will last a long time and keep providing great performance.