Airmar B164 1KW Bronze TH 20D Tilted Element Raymarine

Features: Depth/Temp measurement, operates at 50/200 kHz, 1 kW RMS power, high - performance, and made of bronze. Step up to 1kW power without a fairing! Airmar's new 1kW flush - mount, tilted element transducers are ideal for fast, trailered tournament sport fishing boats that can't have a high - performance fairing. The bronze housing, flush - mounted, protrudes less than 6.35 mm (0.25') outside the hull and can withstand trailer rollers and bunks without damage. The ceramic arrays inside the housing are tilted, providing a perfect vertical beam with maximum energy directly below the boat. Upgrade your fishfinder with Airmar's 1kW tilted element transducers. Comes with a Raymarine connector.

Using this Airmar transducer is quite simple. First, connect it to your fishfinder using the Raymarine connector. Once connected, it will start measuring the depth and temperature of the water for you. When using it on a boat, you don't have to worry about it getting damaged on trailers as the bronze housing can handle sitting on trailer rollers and bunks. As for maintenance, keep the transducer clean. You can gently wipe it down after each use to remove any dirt or debris. If you notice any damage to the housing or the connector, it's best to get it checked or replaced. And remember, this transducer works best at 50/200 kHz, so make sure your fishfinder is set to these frequencies for optimal performance.