Product Detail
The Airmar B75C 12° tilted element High CHIRP Bronze Thru Hull comes with an 11-Pin Raymarine Mix-N-Match Cable. Model: B75C-12-H-11R. It's a depth and fast-response water-temperature sensor. With one transducer, you get 80 kHz of total bandwidth, covering the popular 200 kHz fishing frequency and more. It uses the exclusive Xducer ID® technology. Whether you're a commercial fisherman, charter captain, or tournament angler, these new broadband transducers are a game-changer. CHIRP transducers can detect the bottom down to 3,000m (10,000') with 5 to 10 times greater detail and resolution, allowing you to distinguish between baitfish, game fish, and underwater structures. One installation saves you time and money. It's more sensitive to small targets and sends back detailed information for crisp, high-resolution images on the echosounder screen. When used as a single, it requires A80328; when used as a pair, it needs A102146. Specifications: CHIRP Frequency 130 kHz - 210 kHz, Beamwidth 15° - 9°, Element tilt 12°, Deadrise 8° - 15°, Maximum depth 700ft. What's in the box: B75C-12-H-MM and MMC-11R-HM.
Using this Airmar transducer is easy. First, install it properly according to the instructions that come with the product. Make sure to connect the Raymarine 11 - Pin MM Cable correctly. When you're out fishing, turn on your echosounder and the transducer will start sending and receiving signals. You'll see detailed information on the echosounder screen. As for the CHIRP technology, it will give you great depth detection and clear images. Remember, if you're using it as a single unit, you need to have the A80328 component. If you're using two of these transducers, add the A102146. To maintain it, keep it clean. After each use, rinse it with fresh water to remove any salt or debris. Store it in a dry place. And don't forget to check the cable for any signs of wear and tear regularly. This way, your transducer will serve you well for a long time.
