BEP SPST Sealed Toggle Switch - OFF/(ON) [1002006]

Discover the BEP SPST Sealed Toggle Switch, a reliable solution for your circuit control needs. This single pole, single throw switch can easily turn one circuit on and off. It's commonly used for intermittent horn or windshield wiper control. Built to withstand extreme conditions, it's engineered to IP67 specifications with a double o - ring in the bushing at the toggle and a full epoxy seal at the back. Features include a nominal voltage of 12V/24V DC, rated for 25A at 12V DC and 15A at 24V DC. It comes with 10' 14 AWG wire lead terminals and a 15/32' mounting stem that fits panels up to 1/8' thick. It's equivalent to Cole Hersee part number 55025 - 01. The switch has a chrome color, an (On)/Off action, and comes in a box sized 2'H x 3'W x 5'L weighing 0.2 lbs with UPC 870216046655. WARNING: This product can expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), known to the State of California to cause cancer, birth defects or other reproductive harm. For more info, visit P65Warnings.ca.gov.

Using the BEP SPST Sealed Toggle Switch is easy. Simply connect the 10' 14 AWG wire lead terminals to your circuit. You can use it to control things like intermittent horns or windshield wipers. When installing, make sure the 15/32' mounting stem fits into a panel that's up to 1/8' thick. Remember, this switch has a nominal voltage of 12V/24V DC. It's rated for 25A at 12V DC and 15A at 24V DC, so don't exceed these limits. Also, be aware that this product can expose you to harmful chemicals as stated in the warning. Keep the switch clean and dry to maintain its performance. If it gets dirty, you can gently wipe it with a dry cloth. That's all you need to know to get the most out of your BEP toggle switch.